Marine Watermaker
Marine Watermakers
Refit, Repair & Upgrade Services for Watermakers
For replacement parts, filters, etc. please click HERE
to send us a message
AQUALITE Watermaker 200 GPD
With a production output of 200 GPD, this new series of watermakers presents boaters with a low power consumption alternative, producing unlimited pure water on-board for virtually all applications. The Aqualite Series is available worldwide through our distribution network consisting of over 200 sales and service dealers in over 70 countries. An FCI Product.
Features & Options
AQUALITE Standard Features:
- Touch Pad Controls
- Low Power Consumption
- Feed Pump
- Vibration Isolation Mounts
- 316SS High-Pressure Pump
- 5 Micron Pre-Filtration
- Powder Coated Aluminum Frame
- Touch Pad Controls
- Low Power Consumption
- Feed Pump
- Vibration Isolation Mounts
- 316SS High-Pressure Pump
- 5 Micron Pre-Filtration
- Powder Coated Aluminum Frame
AQUALITE Available Options:
- Digital Remote Display
- Fully Automatic Fresh Water Flush
- Spare Kits
AQUAMISER+ Watermakers 250-1,800 GPD – Framed & Modular
The Aquamiser+ Series offers programmable settings and remote display capability through an advanced control system. This full-featured affordable solution is ideal for meeting your water production needs. With outputs of 250–1,800 GPD this series will provide the safety and controls needed to operate both dependably and efficiently. The Aquamiser+ is available in framed and modular configurations to be utilized in tight spaces and bulkheads. However, despite its small size, the expansive controls include a fully automatic Fresh Water Flush System for unattended maintenance. Scheduled flushes, once a week or more frequently, will help maintain and keep your watermaker fresh and ready for your next voyage. An FCI Product.
Features & Options
AQUAMISER+ Standard Features:
- Staged starting of motors
- Timed start-up (Prime, Init, Run)
- TDS monitoring of product water
- Automatically diverts water to the product tank below 500 PPM
- Programmable automatic Fresh Water Flush; or, convenient one-touch button for manual operation
- Overpressure protection (HP fault)
- Loss of Prime/Fouled Filter detection (LP fault)
- Framed and modular
Features with Remote Display:
- Remote system control up to 150’ away
- Readout of product TDS
- Automatic tank level controls
- Programmable times/set points and display settings
AQUAMISER+ Optional Equipment/Accessories:
- Dockside Treatment System (DTS)
- Filter Replacement Kit
- Pocket PPM Meter
- Ultra-Violet Sterilizer
Max-Q+ Framed Watermaker Series 700-1,850 GPD
The Max-Q+and Max-Q+APC are the latest evolution of the Max-Q product line. Our exclusive V4 control system utilizes a high resolution marine-grade 7-inch touch screen panel with an advanced intuitive interface. Operating and controlling a Watermaker has never been easier. With the optional APC, Automated Pressure Control, making water is literally a touch away. An FCI Product.
Features & Options
MAX-Q+ Features:
- New marine grade 7" high resolution touch screen controller
- Monitors are Type Approval Certified for marine use by: ABS, GL, Lloyd’s Register EMEA, Det Norske Veritas, and Russian Maritime Register of Shipping
- New NMEA 2000 compatible
- Unique IP address for remote access
- Built-in, on-screen troubleshooting
- Small frame footprint
- Ability to relocate Pressure Vessel
- Assembly and FWF Assembly to
reduce frame footprint
- 316SS Boost Pump
- 316SS HP Pump
- Visual indication of product and brine flow
- Upgradeable to 1,850 GPD
- Fully automatic programmable Fresh Water
- Flush with carbon block filter
- Standard 40 sq. ft. commercial Pre-filter
- Dual hertz motors for 50 or 60 hertz operation
- Multiple display station capabilities
- 40 sq. ft. of 5μ micron pleated filtration
- Vibration isolation
- Automatic Flush system
- Washdown Duty Motors
- Flow sensors
- 316SS pressure transducers
- Pretreatment lockout
- Two year warranty
- Complete exploded view manuals
- One-piece skid mount design
MAX-Q+ Optional Equipment / Options:
- DTS, Dockside Treatment System Compatible
- Bridge classified 4.3" or 7" remote touch control station
- pH neutralizer filter
- Cruising kits
- UV sterilizers
- Feed water pressure regulators, relief valves and feed pump
- Automated and manual Media Filters
- Custom system designs
- System soft start
Max-Q+ Modular Watermaker Series 700-1,850 GPD
The Max-Q+and Max-Q+APC are the latest evolution of the Max-Q product line. Our exclusive V4 control system utilizes a high resolution marine-grade 7-inch touch screen panel with an advanced intuitive interface. Operating and controlling a Watermaker has never been easier. With the optional APC, Automated Pressure Control, making water is literally a touch away. An FCI Product.
Features & Options
MAX-Q+ Features:
- New marine grade 7" high resolution touch screen controller
- Monitors are Type Approval Certified for marine use by: ABS, GL, Lloyd’s Register EMEA, Det Norske Veritas, and Russian Maritime Register of Shipping
- New NMEA 2000 compatible
- Unique IP address for remote access
- Built-in, on-screen troubleshooting
- Small frame footprint
- Ability to relocate Pressure Vessel
- Assembly and FWF Assembly to
reduce frame footprint
- 316SS Boost Pump
- 316SS HP Pump
- Visual indication of product and brine flow
- Upgradeable to 1,850 GPD
- Fully automatic programmable Fresh Water
- Flush with carbon block filter
- Standard 40 sq. ft. commercial Pre-filter
- Dual hertz motors for 50 or 60 hertz operation
- Multiple display station capabilities
- 40 sq. ft. of 5μ micron pleated filtration
- Vibration isolation
- Automatic Flush system
- Washdown Duty Motors
- Flow sensors
- 316SS pressure transducers
- Pretreatment lockout
- Two year warranty
- Complete exploded view manuals
- One-piece skid mount design
MAX-Q+ Optional Equipment / Accessories:
- DTS, Dockside Treatment System Compatible
- Bridge classified 4.3" or 7" remote touch control station
- pH neutralizer filter
- Cruising kits
- UV sterilizers
- Feed water pressure regulators, relief valves and feed pump
- Automated and manual Media Filters
- Custom system designs
- System soft start
Atlas+ Series 1,400-3,600 GPD - Framed
The Atlas+ Series is the most compact commercial system FCI has to offer. Built on the smaller, marine Max-Q+ platform, it has all the working benefits of its much larger, industrial Neptune+ sibling. The Atlas+ Series is capable of producing 1,400–3,600 GPD, and is upgradeable throughout the series. The Automated Pressure Control (APC) with manual override puts making pure fresh water, literally, a touch away. At the heart of the system is a durable wash-down duty, 5 HP motor and a robust 316 stainless steel high pressure pump that allow for extended run times. When installation space or generator size is limited, the Atlas+ Series truly encompasses the best of both pleasure boating and commercial worlds.
Features & Options
ATLAS+ Series:
– 1 HP 316SS Feed Pump
– 40 sq ft of 5 Micron Filtration
– Robust 316SS HP Pump
– Wash-down Duty Motors
– Dual Shockmounting
– Exclusive V4 Control System
– Marine Certified HMI Touch Screen
– One-Piece Aluminum Powder Coated
Frame Construction
– Fully Automatic Operation with APC
– Entire Series Is Upgradeable To 3
- framed
ATLAS Modular Series
The Atlas+ Series is the most compact commercial system FCI has to offer. Built on the smaller, marine Max-Q+
platform, it has all the working benefits of its much larger, industrial Neptune+ sibling. The Atlas+ Series is
capable of producing 1,400–3,600 GPD, and is upgradeable throughout the series. The Automated Pressure
Control (APC) with manual override puts making pure fresh water, literally, a touch away. At the heart of the
system is a durable wash-down duty, 5 HP motor and a robust 316 stainless steel high pressure pump that allow
for extended run times. When installation space or generator size is limited, the Atlas+ Series truly encompasses
the best of both pleasure boating and commercial worlds.
Features & Options
ATLAS Modular Series:
– 1 HP 316SS Feed Pump
– 40 sq ft of 5 Micron Filtration
– Robust 316SS HP Pump
– Wash-down Duty Motors
– Dual Shockmounting
– Exclusive V4 Control System
– Marine Certified HMI Touch Screen
– Fully Automatic Operation with APC
– Entire Series Is Upgradeable To 3,600 GPD
– Also available in Framed Configurations
NEPTUNE+ Horizontal Watermaker Series 1,200-9,500 GPD
With the latest FCI V4 controller technology, the Neptune+ system integrates a marine-grade, high resolution 7-inch touch screen panel. Add an Automated Pressure Control, and the Neptune+APC puts complete watermaking automation at your fingertips. Capacities range from 1200 to 9500 GPD, making the Neptune Horizontal ideal for commercial vessels, island homes, oil platforms, hotels, or large yachts. An FCI Product..
RELIABILITY AND COMPLETE AUTOMATION AT YOUR FINGERTIPS. FCI’s next generation controller and interface allows customization of your watermaker through intuitive advanced touch screen controls. Our monitors’ higher heat tolerance and system design allows it to work in the harshest environments. FCI touch screen controllers can be installed with confidence, because they are Bridge Classified for marine use with Type Approval Certifications from: ABS, GL, Lloyd’s Register EMEA, Det Norske Veritas, and Russian Maritime Register of Shipping. Rest assured, our displays will not interfere with other on-board electronics.
Click for Specifications
Features & Options
NEPTUNE+ Standard Features:
- Advanced marine grade 7" high resolution touch screen controller
- Monitors are Type Approval Certified for marine use by: ABS, GL, Lloyd’s Register EMEA, Det Norske Veritas, and Russian Maritime Register of Shipping
- New NMEA 2000 compatible
- Unique IP address for remote access
- Built-in, on-screen troubleshooting
- 316SS Low-pressure Pump with closed impeller design (producing 50% more pressure with the same horsepower)
- 316SS HP Pump
- Commercially designed to operate 24/7, 365 days per year
- Pressure Vessels with 316SS pressure and product ports, stress-eliminating engineering
- 80 sq. ft. of Commercial Pre-filtration
- Conservatively rated to ensure performance under varying conditions
- Wash-down duty motors (epoxy coated, neoprene gaskets)
- Dual isolation mounts: 6 each on the pump and motor skid, and 6 on the main frame
- One Year Warranty
NEPTUNE+ Optional Equipment/Options:
- Bridge classified 4.3” or 7” remote touch control station
- pH neutralizer filter
- Spare parts kits
- Cruising kits
- UV sterilizers
- Feed water pressure regulators, relief valves and feed pump
- Automated and manual Media Filters
- Custom system designs
- System soft start
NEPTUNE Vertical Series
Since its inception, the FCI Neptune+ Series has been recognized for its high efficiency and extreme reliability.
With output capacities ranging from 3,400 to 10,000 GPD and a dependable Direct Drive High Pressure Pump,
it has proven to be a dependable workhorse by utilizing premium components: 316SS pumps, commercial
filtration, NEMA 4X electrical enclosures, pressure vessels with 6x the safety factor, and industry-leading
certified control systems. Coupling the corresponding media filtration skid with Neptune's built-in Automated
Pressure Control creates the optimum system, putting automated watermaking at your fingertips. Horizontal
and Modular configurations are also available to accommodate your space and installation requirements. All
configurations are ideal for commercial vessels, island homes, oil platforms, hotels, or large yachts.
Features & Options
NEPTUNE Vertical Series
– 7" High Resolution HMI Touch Screen
that is Marine Grade and Bridge Certified
– Marine Duty Direct Drive Gearbox
– APC Fully Automated Operation
and Pressure Control
– 80 sq. ft. pleated Pre-filter cartridge
– Fully Automated Fresh Water Flush System
– Also available in Horizontal and Modular
configurations for flexible installation options.
NEPTUNE Horizontal
RELIABILITY AND COMPLETE AUTOMATION AT YOUR FINGERTIPS. FCI’s next
generation V4 controller and interface allows customization of your watermaker
through intuitive advanced touch screen controls. Our monitors’ higher heat
tolerance and system design allow them to work in the harshest environments. FCI
touch screen controllers can be installed with confidence, because they are Bridge
Classified for marine use with Type Approval Certifications from: ABS, GL, Lloyd’s
Register EMEA, Det Norske Veritas, and Russian Maritime Register of Shipping.
Rest assured, our V4 control will reliably perform for your application, and is rugged
enough to last in your environment.
Features & Options
NEPTUNE Horizontal
– 7" High Resolution HMI Touch Screen
that is Marine Grade and Bridge Certified
– Marine Duty Direct Drive Gearbox
– APC Fully Automated Operation
and Pressure Control
– 80 sq. ft. pleated Pre-filter cartridge
– Fully Automated Fresh Water Flush System
– Available in Horizontal, and Modular
configurations for flexible i Shown NH46263+APC nstallation options.
POSEIDON Watermaker Series 10,000-26,500 GPD
The Poseidon Series is the industry’s choice when commercial applications call for substantial capacities of fresh water. With production ranges from 10,000–26,500 GPD, the Poseidon Series is commonly used in applications such as: offshore oil platforms, petroleum support vessels, commercial ships, military vessels, mid-sized hotels, island applications and various remote necessities. Its unrivaled quality and our superior manufacturing techniques are proven to be reliable in the most demanding marine applications. An FCI product.
Features & Options
POSEIDON Standard Features:
- State-of-the-art engineering
- Next generation advanced touch screen controller with complete system readouts
- 316SS high-pressure pump
- Multiple display station capabilities
- Built-in media filtration
- 120 sq. ft. of 5μ micron pleated filtration
- Pulsation dampener
- Timing belt drive system
- Vibration isolation
- Automatic Flush system
- TEFC Motors
- Thermal overload protection
- Flow meters and flow sensors
- 316SS pressure transducers
- Pretreatment lockout
- One year warranty
- Complete exploded view manuals
- One-piece skid mount design
POSEIDON Optional Equipment/Options
- Raw water strainer
- Feed water pressure regulators
- Feed water relief valves
- Feed water feed pump
- Pretreatment system
- Post treatment systems
- Custom system designs
- System soft start
SW Series Reverse Osmosis Systems
Fresh Water From the Sea
Our SW series seawater reverse osmosis systems include many standard features which make them suitable for the most demanding applications. They are also available with optional operational and control features and ancillary equipment giving you the capability to completely customize your system.
Our SW series seawater reverse osmosis systems include many standard features which make them suitable for the most demanding applications. They are also available with optional operational and control features and ancillary equipment giving you the capability to completely customize your system.
Energy recovery turbine
38,000 ppm TDS
25,000-500,000 GPD
38,000 ppm TDS
25,000-500,000 GPD
Features & Options
SW SERIES Standard Features:
- Plumbed and integrated post shutdown product water flush system
- Variable frequency drive (VFD) for the high pressure pump
- Controlled by an Allen-Bradley PLC and touch screen human machine interface (HMI)
- Compact and skid mounted to minimize floor space and field installation
- Aircraft grade aluminum frame coated with marine grade polyurethane paint
- Integrated clean in place (CIP) system
- Easy serviceability. No hidden or out of the way components
- FRP five micron prefilter
- Comprehensive factory testing
- Multi stage centrifugal high pressure pump
- Skid mounted NEMA 4X low voltage control panel
- Stand alone NEMA 12 high voltage power panel (VFD enclosure)
- Schedule 10 super duplex high pressure piping
- Schedule 80 PVC low pressure piping
- Dry contacts for pre and post treatment equipment and tank level switches
SW SERIES Optional Features:
- Positive displacement high pressure pump
- Multi media filters
- Pretreatment and posttreatment chemical feed systems
- Feed pump and transfer pump stations
- SCADA system
- Containerized
We understand that due to the current COVID-19 situation, there’s a lot of uncertainty. We’d just like to take this opportunity to reassure you that we are here to help you with your water purification needs. In accordance with advice from senior officials, we’re obeying social distancing measures and maintaining our office hygiene to the highest of standards. We will continue to deliver the outstanding service you rely on.
Browse Our Website
Contact Information
(954) 585-6177
2860 W. State Road 84 Suite 108 , Fort Lauderdale, FL 33312
2860 W. State Road 84 Suite 108 , Fort Lauderdale, FL 33312
| Sun | Closed |
| Mon-Fri | 8:00 AM - 5:00 PM |
| Sat | Closed |
